LLMpediaThe first transparent, open encyclopedia generated by LLMs

Ford Fusion Hybrid

Generated by Llama 3.3-70B
Note: This article was automatically generated by a large language model (LLM) from purely parametric knowledge (no retrieval). It may contain inaccuracies or hallucinations. This encyclopedia is part of a research project currently under review.
Article Genealogy
Parent: Ford Motor Company Hop 3
Expansion Funnel Raw 77 → Dedup 41 → NER 14 → Enqueued 6
1. Extracted77
2. After dedup41 (None)
3. After NER14 (None)
Rejected: 27 (not NE: 27)
4. Enqueued6 (None)
Similarity rejected: 1
Ford Fusion Hybrid
NameFord Fusion Hybrid
ManufacturerFord Motor Company
Production2010-2020
AssemblyHermosillo, Mexico
ClassMid-size car
Body styleSedan
LayoutFront-wheel drive
PlatformFord CD3 platform
EngineAtkinson cycle Gasoline-electric hybrid
TransmissionE-CVT Continuously variable transmission

Ford Fusion Hybrid is a Mid-size car that was produced by the Ford Motor Company from 2010 to 2020. The Ford Fusion Hybrid was designed to provide a fuel-efficient alternative to traditional gasoline-powered vehicles, with a powertrain that combined a Gasoline engine with an Electric motor. This hybrid powertrain was developed in collaboration with Toyota, General Motors, and Daimler AG, and was also used in other Ford models, such as the Ford Escape Hybrid and Ford C-Max Hybrid. The Ford Fusion Hybrid was assembled at the Hermosillo plant in Mexico, which also produced other Ford models, including the Ford Fusion and Ford Lincoln MKZ.

Introduction

The Ford Fusion Hybrid was first introduced at the 2009 North American International Auto Show in Detroit, Michigan, as a 2010 model. It was designed to compete with other hybrid vehicles, such as the Toyota Camry Hybrid and Honda Accord Hybrid, and was marketed as a fuel-efficient alternative to traditional gasoline-powered vehicles. The Ford Fusion Hybrid was also designed to meet the requirements of the United States Environmental Protection Agency (EPA) and the California Air Resources Board (CARB), which had established strict emissions standards for vehicles. The Ford Fusion Hybrid was certified as an Advanced Technology Partial Zero Emissions Vehicle (AT-PZEV) by the CARB, and was also eligible for a federal tax credit of up to $3,400, as specified in the Energy Policy Act of 2005.

Design and Features

The Ford Fusion Hybrid was based on the Ford CD3 platform, which was also used in other Ford models, such as the Ford Fusion and Ford Lincoln MKZ. The Ford Fusion Hybrid had a sleek and aerodynamic design, with a drag coefficient of 0.33, which was designed to reduce wind resistance and improve fuel efficiency. The vehicle was equipped with a range of standard features, including Ford Sync Infotainment system, Dual-zone climate control, and a Premium audio system with Sony speakers. The Ford Fusion Hybrid was also available with a range of optional features, including a Moonroof, Heated seats, and a Navigation system with SiriusXM Satellite radio.

Hybrid Powertrain

The Ford Fusion Hybrid was powered by a Atkinson cycle Gasoline-electric hybrid powertrain, which combined a 2.0-liter Gasoline engine with an Electric motor. The powertrain was designed to provide a total system output of 188 horsepower, and was equipped with an E-CVT Continuously variable transmission. The Ford Fusion Hybrid had an estimated EPA rating of 43 miles per gallon in the city and 41 miles per gallon on the highway, making it one of the most fuel-efficient vehicles in its class. The powertrain was also designed to meet the requirements of the United States Environmental Protection Agency (EPA) and the California Air Resources Board (CARB), which had established strict emissions standards for vehicles.

Safety and Reliability

The Ford Fusion Hybrid was designed to provide a high level of safety and reliability, with a range of standard features, including Dual front airbags, Side airbags, and Anti-lock braking system (ABS). The vehicle was also equipped with a range of advanced safety features, including Electronic stability control (ESC), Traction control system (TCS), and a Rearview camera. The Ford Fusion Hybrid was rated as a Top Safety Pick by the Insurance Institute for Highway Safety (IIHS), and was also rated as a 5-star overall safety vehicle by the National Highway Traffic Safety Administration (NHTSA). The vehicle was also covered by a range of warranties, including a 3-year/36,000-mile Bumper-to-bumper warranty and a 5-year/60,000-mile Powertrain warranty.

Reception and Sales

The Ford Fusion Hybrid received generally positive reviews from critics, with many praising its fuel efficiency, comfortable ride, and advanced safety features. The vehicle was also a commercial success, with over 300,000 units sold in the United States during its production run. The Ford Fusion Hybrid was also popular with fleets, including Taxi and Ride-hailing companies, such as Uber and Lyft. The vehicle was also used by a range of government agencies, including the United States Postal Service and the Federal Bureau of Investigation (FBI). The Ford Fusion Hybrid was also recognized with a range of awards, including the Green Car of the Year award from the Green Car Journal.

Model Year Changes

The Ford Fusion Hybrid underwent a range of changes during its production run, including updates to its powertrain, interior, and exterior design. For the 2013 model year, the vehicle received a range of updates, including a new Grille design and a range of new interior features, including a Heated steering wheel and a Premium audio system with Sony speakers. For the 2017 model year, the vehicle received a range of updates, including a new Infotainment system with Ford Sync 3 and a range of new safety features, including Adaptive cruise control and Lane departure warning. The Ford Fusion Hybrid was discontinued after the 2020 model year, and was replaced by the Ford Fusion Plug-in hybrid model. Category:Hybrid vehicles